Overview of vacuum extenders for penis enlargement

vacuum extender for penis enlargement

The purpose of the extender is to stretch the penis most comfortably. This mechanism only works if the head is securely mounted. The duration of wear of the device depends on the level of safety and ease of mounting, and, therefore, the speed of progress. Vacuum extenders are considered the best option, as well as a better version - vacuum adhesive. This device appeared on the market about 10 years ago and has since replaced the mechanical ones significantly.

Design features and operating principles

In a vacuum extender, the head of the penis is not fitted with a loop or strap, but is sucked in with a vacuum into a special bowl (chamber, vacuum nozzle). The device works on the principle of a vacuum pump, but in this case, the effect is only on the head and the area adjacent to it. Air from the chamber, as in a pump, is pumped out by a pump or pear.

The main advantages of models with vacuum fixation:

  • Don't slip;
  • Effectively corrects the curvature of the male organ;
  • Do not pinch the head and foreskin;
  • Suitable for micropenis;
  • Comfortable to wear.

The main disadvantage of vacuum -mounted extenders is the appearance of foam on the head. This does not happen when mechanical. Damage is caused by tissue delamination under the influence of vacuum. It is not possible to continue the class until the blisters heal, and because they appear frequently, the effectiveness of wearing the device decreases significantly.

Many manufacturers equip their products with protective covers to protect the head. Some models come with patch rollers that should be sealed before being placed inside the cover. Subsequent adhesion and removal procedures cause discomfort and pain.

Some men complain about the inconvenience of wearing such an extender: protection is not set on a relaxed head, it is necessary to bring the penis to a state of at least partial erection. While wearing the extender, the head is reduced, as a result, a gap is formed between it and the covering wall - the skin is again exposed to the traumatic effects of vacuum.

Scheme of using a vacuum extender:

  1. Cover the head, put a protective hat on it.
  2. Roll up part of the silicone sleeve attached to the top of the camera on its body.
  3. Place the penis in the space, roll the silicone sleeve to the end along the shaft.
  4. Inhale excess air with a blower or pump.
  5. Fix the penis on the extender rod, adjust its length.

Part of the penis is compressed tightly with silicone, which causes discomfort and interferes with blood flow. The covered area of the stem is almost not extended. If the penis is about 12 cm, then most of it will be under the silicone seam.

In the advanced model with a vacuum adhesive type, only the head is sucked into the chamber, and the sleeve is replaced with a soft membrane. The penis and membranes are pre-lubricated with a special lubricant, then the head is brought to the opening of the chamber and sucked into it with some movement of the rubber bulb. Then it is disconnected, the device is securely mounted on the head. To remove it, simply turn the valve at the top of the chamber. The lubricant attaches the head to the membrane, preventing gaps from forming, which eliminates the appearance of foam.

How to use

Before the first installation of the vacuum extender, the starting length is set - the size of the erect penis. In the future, the compressive force is controlled by a spring on the rod (on the spring-loaded model): if the scale is fully visible (the notch is not closed), then there is no tension. If no tension is visible with the rod fully opened, then the additional length is raised using the rod included in the kit. The traction of a stretcher (belt system) can be determined using a household spring scale.

It is impossible to immediately set a large level of tension: it is possible to compress the albuginea covering the cavernous body, worsening the erection, edema of the head, lack of growth and even a decrease in the length of the penis. Within a month, a light adjustment load is given. The extender is worn no more than 1-2 hours with a tensile force of 200-400 g, a maximum of 500 g. When the penile tissue is accustomed to stretching, you should switch to a more serious mode: 6-8 hours a day (not necessarily continuous) with a load of 1. 1 kg. It is possible to wear the extender at a maximum length (traction) of only 4 weeks.

Power Growth Program:

  • Remove the extender to the length of the erect penis, tension 300-600 g;
  • When worn, the load can increase up to 1kg;
  • Wear for 2 hours a day without a break or spend 2 sessions for 1. 5 hours. One day off per week is required.

It is important to measure the length of the penis (stretched, not erect) after each exercise. Improvements indicate the effectiveness of the selected program. If the penis is reduced, then rest for 2-3 days is necessary.

For a year, with the help of a vacuum extender, it is possible to increase the length of the penis by 3-4 cm, and its girth by 1 cm In young men, growth occurs faster than in mature men, due to the high elasticity of tissues. The result also depends on the density of the protein layer.

Contraindications

Before buying a vacuum extender, you should consult a doctor - he will help identify the presence of contraindications to wearing it. The main ones include the following:

  1. Violation of blood clotting, brittle vessels. The vacuum will trigger the appearance of a hematoma.
  2. Prostate adenoma, prostatitis.
  3. Scrotal hernia.
  4. Sexually transmitted infections.

It is dangerous to use a vacuum extender while under the influence of painkillers, drugs or alcohol. It is undesirable to wear the device at night - in dreams it is easy to miss the moment of onset of tissue oxygen starvation due to excessive squeezing, and spontaneous night erections are also dangerous.

Overview of popular models

Most urologists-andrologists recommend a vacuum system with the fixation of a vacuum adhesive to their patients for penis enlargement. The soft membrane protects the head from damage by preventing direct exposure to vacuum. The vacuum adhesive model is also considered comfortable and efficient. Kit includes camera, pear, rod, a set of membranes of various sizes, connection rod, gel. There are detailed instructions on how to put on and wear the device properly. The maximum length of the elongator is 32 cm.

There are kits for upgrading rope and loop extenders. However, the cost is so high that it is easier to buy a vacuum extender.

complete set of vacuum extender for penis enlargement

Korean extensions are ranked by manufacturers as the most comfortable to wear with an additional head enlargement function. Fastened by vacuum-adhesive method. Kit includes 3 membranes, 8 pin screw connections.

Method of use:

  1. Membranes of suitable diameter are stretched over the edges of the chamber, lubricated with lubricant (along with the head of the penis);
  2. The camera is placed on a trunk;
  3. The shaft of the penis is placed in an extender, the head is threaded into the chamber;
  4. Pear pumps out the air.

The device from a Swiss company is a vacuum extender designed for long -term use. According to men, it is recognized as the most comfortable. The kit includes 3 vacuum chambers with a condom attached to it, 4 cuffs, 2 protective covers, a pump. This model includes a belt fixing system (stretcher), which allows the use of extenders in public places.

Usage instructions:

  • A protective cap is placed on the head.
  • The penis is tied between the elongated rods, the rods rolled until the optimum level of tension is reached.
  • The head is placed in a chamber with the appropriate size (a template to determine the size is attached), the condom is rolled onto the stem part.
  • A pump in the form of an accordion is attached to the chamber, with the help of which air is pumped out.

If necessary, the rod is removed, the member with the camera on the head is pulled to the belt with a belt.

Some make homemade extenders using bicycle pump containers, plastic, silicone and plumbing fittings. It is very difficult to make a device that is truly functional and safe with your own hands. In terms of quality, such crafts are usually inferior to cheap Chinese extenders.

Reviews

Man, 44: "I've been wearing the device with a belt stretcher for half a year now. The increase in length is 2 cm - a significant result. I added charm with jelq and hanging weights, but rarely.

Man, 25: "I ordered a Chinese device and I was thinking of returning or exchanging it with a Korean device before it was too late. It was uncomfortable to wear, the penis was squeezed to the point of colic, there was no question of effectiveness in such a situation.

Conclusion

Swiss, Korean and German production vacuum lengthening is officially recognized as an effective means for penis enlargement. Comes with detailed video instructions, which eliminate abuse. It is important to take into account that the regularity of wearing an extender is just as important a condition for success as its quality.